Read The Times Australia

Daily Bulletin

Is hip dysplasia in my newborn something to worry about?

  • Written by: Kirsten Thompson, Senior clinical lecturer, University of Western Australia

This is part of our series on kids' health. Read the other articles in our series here.

Developmental dysplasia of the hip, sometimes termed congenital dysplasia or dislocation of the hip, is a chronic condition present from early childhood which can cause permanent disability if not identified and treated early.

Hip dysplasia affects up to 10 people in every 1,000, and is characterised by underdevelopment of the hip bones (dysplasia). This may be associated with laxity (looseness) or even dislocation of the hip joints. It may affect one or both hips.

The hips are ball-and-socket joints. These develop while a baby is still in the uterus, as well as in early childhood. In a newborn infant, most of the hip joint is cartilage, which is soft and may contribute to the laxity of the joint. During the baby’s first year, the cartilage is replaced by bone.

In normal hip development, the ball component grows faster than the socket. The development of the joint is dependent on the ball component remaining within the socket. Various factors may affect the development of the joint, along with the ligaments which support the joint and hold the two bony components together.

In hip dysplasia, the socket component (acetabulum) is underdeveloped, so the ball component is not well fixed in the socket. This means that the hip is more prone to dislocation, where the ball slides out of the socket. This can cause serious problems for the blood supply to the hip, and also affect walking.

Causes

Anything that reduces or prevents movement of the hip joint increases the risk of hip dysplasia. Large babies, reduced amniotic fluid or a first pregnancy (with a less “stretchy” uterus) reduce the space a baby has to move around when still in the uterus.

Being breech (bottom instead of head first) at delivery and tight swaddling during early childhood also increase the risk of hip dysplasia.

Babies who have someone in their immediate family with hip dysplasia are more likely to be affected. Females are four times more likely to be affected than males. This is probably related to hormones the mother produces, which cause ligaments to be more relaxed around the time of birth. Girls may be more sensitive to these hormones than boys.

Diagnosis

There are usually no symptoms of hip dysplasia at birth, as babies are not able to walk or crawl. Because of the risks of disability if not detected, all babies undergo screening, usually physical examination by a trained midwife or doctor at birth and again at the routine six-week check.

Ongoing examinations take place over the first 12 months. At these examinations, clinicians feel for laxity of the hip joints. This may be felt as a looseness of the joint, or hips which do not stay in the joint (dislocate) when moved.

image An illustration of a dislocated hip. from www.shutterstock.com

Other signs may include an asymmetry of the buttock creases or leg lengths (due to one hip not being fully located in the joint). Not all cases of laxity mean that the child has dysplasia, and not every case of dysplasia will be detected by this clinical examination as the condition develops with time.

Those with risk factors such as being born breech often have enhanced screening, such as an ultrasound.

An X-ray may be used in older children or adults to demonstrate the underdeveloped socket of the hip. An X-ray is less useful in younger infants as the hips still contain a large proportion of cartilage, which is not so well seen on X-ray.

If dysplasia is not detected through infant screening, older children or adults may present with difficulty walking, a limp, arthritis, or pain.

Treatment

Most babies with slightly lax hips at birth usually resolve by six weeks without any treatment. Those with lax hips that don’t resolve should begin treatment by six to eight weeks. If a baby has a dislocated hip, treatment should start immediately.

A harness is usually used to treat dysplasia in infants. This holds the hips bent forward and held out, to maximise the contact between the ball and socket.

image The harness worn by infants to correct dysplasia. from www.shutterstock.com

The harness is removable for washing and is otherwise worn continuously for three to seven months. Previously, wearing two or three nappies instead of one was used as a treatment. This has not been shown to be effective, and may delay treatment with an appropriate harness.

The main (but rare) possible side effect to wearing a harness is avascular necrosis (the death of bone tissue). This is thought to be caused by the ball component of the hip being pressed hard against the socket. The result is squashing of the blood vessels supplying the bone, which might reduce the blood supply there. This can result in arthritis and damage to the bone. It is more likely if treatment starts late.

Surgery is sometimes undertaken, although most cases (up to 95%) resolve with early application of a harness. Surgery is only used if harness treatment is unsuccessful, or if a patient presents later than infancy. Surgery for hip dysplasia has a higher risk of avascular necrosis than harnesses.

Long term effects

Developmental dysplasia of the hip can cause significant long term problems if it is not identified and treated early. These include early (from before age 30) arthritis, back pain, need for multiple surgeries, and a shorter leg on one side.

With early treatment, the rate of later hip problems requiring further treatment is very low (around 4%).

To minimise risk of later disability, parents whose newborn has some of the risk factors should discuss this with their doctor to ensure adequate examination and screening.

Further reading:

Do kids grow out of childhood asthma?

A snapshot of children’s health in Australia

Nightmares and night terrors in kids: when do they stop being normal?

Bed-wetting in older children and young adults is common and treatable

Migraines in childhood and adolescence: more than just a headache

‘Slapped cheek’ syndrome: a common rash in kids, more sinister in pregnant women

Teenage pain often dismissed as ‘growing pains’, but it can impact their lives

Authors: Kirsten Thompson, Senior clinical lecturer, University of Western Australia

Read more http://theconversation.com/is-hip-dysplasia-in-my-newborn-something-to-worry-about-61901

Business News

How Immigration Lawyers Can Help

Introduction Visa decisions can shape employment, family life, study plans, travel, and future residence. A small omission can lead to delay, added expense, or refusal. Immigration lawyers assess l...

Daily Bulletin - avatar Daily Bulletin

How Industrial Drying Equipment Supports Efficient Processing

Many industrial processes require moisture to be removed from compressed air, products or process materials before they move to the next stage. Excess moisture can affect equipment performance, produc...

Daily Bulletin - avatar Daily Bulletin

Practical Ways a Whiteboard Can Improve Workplace Communication

Effective communication helps teams stay organised, share ideas and keep track of important information. While digital tools are now common in many workplaces, a whiteboard continues to provide a simp...

Daily Bulletin - avatar Daily Bulletin

Designing Eco-Friendly Custom Water Bottles for Your Next Event

The Evolution of Sustainable Event Merchandise Event planning has undergone a massive transformation over the last decade. Gone are the days when organizers could hand out cheap, single use plastic...

Daily Bulletin - avatar Daily Bulletin

Why Choosing a Professional Florist Melbourne Makes Flower Delivery Impactful

Flowers have a great power to speak when humans cannot express their feelings with right words. Flowers are the best gifts when you are celebrating a birthday or welcoming a newborn child into your fa...

Daily Bulletin - avatar Daily Bulletin

The Business Case for Choosing Australian Fabricators Over Imported Alternatives

For a long time, you might have defaulted to overseas suppliers when sourcing fabricated metal components for a project. The unit price was lower on paper, and the maths seemed straightforward. That...

Daily Bulletin - avatar Daily Bulletin

Australian organisations are relying on business continuity plans built for a far more predictable world

Tariff escalations, supply chain fragility, geopolitical events, and the ongoing threat of cyber disruption have reshaped the risk environment facing Australian organisations. The problem is that ma...

Daily Bulletin - avatar Daily Bulletin

How to Rent a Car for Uber in Melbourne: What Every New Driver Needs to Know

Starting out as an Uber driver in Melbourne is not as complicated as it sounds but getting the vehicle right is where most new drivers get stuck. Uber has strict requirements around vehicle age, condi...

Daily Bulletin - avatar Daily Bulletin

When Should You Speak to a Lawyer About a Legal Issue?

Legal issues can begin with a simple question, then become harder to manage once formal steps are involved. Many people wait until a matter feels urgent before seeking guidance, even though earlier ...

Daily Bulletin - avatar Daily Bulletin

The Daily Magazine

Why Accurate Measurements Matter When Ordering Flatpack Cabinets

Ordering flatpack cabinets can make a renovation or storage project more manageable, but the proce...

How Long Does Interstate Freight Take in Australia?

If you have ever arranged for stock, equipment or materials to travel from one Australian state to a...

How AEC Firms Can Scale Faster Without Sacrificing Project Quality

Growth presents a fundamental dilemma for architecture, engineering, and construction firms: expan...

What Makes an Aesthetic Clinic Worth Going Back To?

Trying an aesthetic clinic for the first time can feel like a bit of a gamble. You can read review...

Elevate Your Morning Routine with Cafe-Style Coffee at Home with the Right Coffee Machine

There's something magical about that first sip of coffee in the morning. It’s more than just a bev...

Top Garment Steamers for Busy Professionals in Australia

The gap between garment steamers built for a quick touch-up and ones built to keep pace with a wor...

Correct Sleeping Posture to Minimize Back Strain

Most people don’t pay much attention to how they sleep until they start waking up with a stiff bac...

Why Product Longevity Matters for Sustainable Australian Buildings

Sustainability in building design is often associated with recycled materials, renewable resources a...

NDIS Support Coordination Explained: What Does a Support Coordinator Actually Do?

NDIS support coordination explained means understanding how a professional can help participants n...