Read The Times Australia

Daily Bulletin

It's time-out for leap seconds: an expert explains why the tiny clock adjustments will be paused from 2035

  • Written by: Darryl Veitch, Professor of Computer Networking, University of Technology Sydney
It's time-out for leap seconds: an expert explains why the tiny clock adjustments will be paused from 2035

Meeting in Versailles, France, on Friday, the Bureau International des Poids et Mesures (BIPM) has called time-out on “leap seconds” – the little jumps occasionally added to clocks running on Coordinated Universal Time (UTC), to keep them in sync with Earth’s rotation.

From 2035, leap seconds will be abandoned for 100 years or so and will probably never return. It’s time to work out exactly what to do with a problem that has become increasingly urgent, and severe, with the rise of the digital world.

Why do we have leap seconds?

Roll back to 1972, when the arrival of highly accurate atomic clocks laid bare the fact that days are not exactly 86,400 standard seconds long (that being 24 hours, with each hour comprising 3,600 seconds).

The difference is only in milliseconds, but accumulates inexorably. Ultimately, the Sun would appear overhead at “midnight” – an indignity metrologists (people who study the science of measurement) were determined to prevent. Complicating matters further, Earth’s rotation, and thus the length of a day, actually varies erratically and can’t be predicted far in advance.

The solution arrived at was leap seconds: one-second corrections applied at the end of December and/or June on an ad hoc basis. Leaps were scheduled to ensure the timekeeping system we all use, Coordinated Universal Time (UTC), is never more than 0.9 seconds away from the Earth-tracking alternative, Universal Time (UT1).

But all this was before computers ruled the Earth. Leap seconds were an elegant solution when first proposed, but are diabolical when it comes to software implementations.

This is because a leap second is an abrupt change that badly breaks key assumptions used in software to represent time. Base concepts such as time never repeating, standing still, or going backward are all at risk – as well as other quaint notions like each minute lasting exactly 60 seconds.

Leaping into danger

Question: what’s worse than mixing computers and leap seconds? Answer: mixing billions of interconnected networked computers, all trying to execute a leap second jump at (theoretically) the same time, with a great many failing in a wide variety of ways.

It gets better: most of those computers are learning about the impending leap second from the network itself. Better still, almost all are constantly synchronising their internal clocks by communicating over the internet to other computers called time servers, and believing the timing information these supply.

Imagine this scene then: during leap-second madness, some time-server computers can be wrong, but client computers relying on them don’t know it. Or they can be right, but client computer software disbelieves them. Or both client and server computers leap, but at slightly different times, and as a result software gets confused. Or perhaps a computer never receives word that a leap is happening, does nothing, and ends up a second ahead of the rest of the world.

All of this and more was seen in the analysis of timing data from the last leap-second event in 2016.

The ways in which computer confusion over time can impact networked systems are too numerous to describe. Already there are documented cases of significant outages and impacts arising from the most recent leap second events.

More broadly though, consider the networked critical infrastructure our world runs on, including electricity grids, telecommunications systems, financial systems, and services such as collision avoidance in shipping and aviation. Many of these rely on accurate timing at millisecond scales, or even down to nanoseconds. An error of one second could have huge and even deadly impacts.

Satellites GLONASS and Geo-IK displayed overhead at an exhibit in Moscow.
Russia voted against the decision to abandon leap seconds, in part because this will require a major update to its global navigation satellite system, GLONASS, which incorporates leap seconds. Shutterstock

Time’s up!

In recognition of the growing costs to our computer-based world, the idea of doing away with leap seconds has been on the table since 2015.

The International Telecommunications Union, the standards body that governs leap seconds, pushed back a decision several times. But pressure continued to grow on multiple fronts, including from major tech players such as Google and Meta (formerly Facebook).

The majority of international participants in the vote, including the US, France and Australia, supported the recent decision to drop the leap second.

The Versailles decision is not to abandon the idea of keeping everyday timekeeping (UTC) aligned with Earth. It’s more a recognition that the disadvantages of the current leap second system are too high, and getting worse. We need to stop it before something really bad happens!

The good news is we can afford to wait the suggested 100 years or so. During this time, the discrepancy may grow to as much as a minute, but that’s not very significant if you consider what we endure with daylight savings time each year. The logic is that by dropping the leap second right now, we can avoid its dangers and allow plenty of time to work out less disruptive ways to keep time aligned.

Read more: A brief history of telling time

How could we deal with this down the track?

An extreme approach would be to fully adopt an abstract definition of time, abandoning the long-held association between time and Earth’s movements. Another is to make larger adjustments than a second, but far less frequently and with far better preparation to limit the dangers – perhaps in an age where software has evolved beyond bugs.

The decision of how far we’re willing to let things drift before a new approach is decided upon has its own deadline: the next meeting of the Bureau International des Poids et Mesures is set for 2026. In the meantime, we’ll be stuck with leap seconds until 2035.

Since the Earth has surprisingly begun to spin faster in recent decades, the next leap second may, for the first time, involve removing a second to speed up UTC, rather than adding a second to slow it down.

Software for this case is largely already in place, but has never been tested in the wild – so be prepared to leap into the unknown.

Read more: Scientists are hoping to redefine the second – here's why

Authors: Darryl Veitch, Professor of Computer Networking, University of Technology Sydney

Read more https://theconversation.com/its-time-out-for-leap-seconds-an-expert-explains-why-the-tiny-clock-adjustments-will-be-paused-from-2035-194922

Business News

Is Your Brand Showing Up in AI Search? Most Melbourne Brands Aren't.

The New Front Door Nobody Told You About Something changed. Quietly. Without a press release. The way buyers find businesses in Australia has been rewired. Not replaced, rewired. Google isn't dead...

Daily Bulletin - avatar Daily Bulletin

How Australian Businesses Can Measure SEO ROI

SEO can feel vague when you are staring at a dashboard full of numbers that do not clearly connect to revenue. The key is to measure the right signals in the right order, then tie them back to outcome...

Daily Bulletin - avatar Daily Bulletin

How Commercial Roller Shutters Improve Site Security Without Slowing Operations

Security upgrades can be frustrating when they make everyday work harder. A door that takes too long to open, creates bottlenecks at shift change, or fails at the worst time can turn “better protectio...

Daily Bulletin - avatar Daily Bulletin

Why a Document Destruction Service Still Matters for Modern Businesses

Businesses generate large volumes of information every day, from staff records and contracts to invoices, reports and customer files. While attention often focuses on how documents are stored, the way...

Daily Bulletin - avatar Daily Bulletin

Bicycle Rack Safety and Space-Smart Storage

Bike storage problems usually show up as small annoyances first: tangled handlebars, scratched frames, and bikes that topple when you pull one out. Over time, those issues become safety risks, especia...

Daily Bulletin - avatar Daily Bulletin

How to Tell if a Childcare Centre Is a Good Fit for Your Child

Choosing childcare can feel like you’re making a huge decision with limited information. Tours are short, centres are often on their best behaviour, and your child might act differently in a new space...

Daily Bulletin - avatar Daily Bulletin

Car Import Timeline: What Usually Happens at Each Stage

Importing a car into Australia can feel confusing because multiple agencies and checkpoints are involved, and the timeline is shaped as much by paperwork quality as it is by shipping speed. The most u...

Daily Bulletin - avatar Daily Bulletin

Portable Toilet Hygiene Standards Explained: Clean vs Sanitised vs Disinfected

In portable toilet servicing, the words clean, sanitised, and disinfected often get used as if they mean the same thing. They don’t. And that difference matters because a unit can look tidy and still ...

Daily Bulletin - avatar Daily Bulletin

Options Available When a Company Faces Financial Distress

Financial distress can develop gradually or arrive suddenly, and when it does, the decisions made in the early stages often determine what options remain available later. Directors who act promptly ...

Daily Bulletin - avatar Daily Bulletin

The Daily Magazine

What Actually Makes a Good Criminal Lawyer in Melbourne

Most people only think about this question once. That is usually too late. Most people charged wi...

Why Working With A Chatswood Tutor Can Improve Academic Performance

Academic expectations continue increasing for students across primary school, high school, and senio...

Is It Worth Getting Solar Panels in Melbourne?

The real question is not whether solar works in Melbourne. It works. The question is what it is co...

How A Diploma Of Project Management Builds Practical Skills For Modern Work Environments

Developing the ability to plan, execute, and deliver outcomes efficiently is a key requirement in to...

How to Choose the Right Football for Every Level

Choosing a football may seem straightforward, but the right option depends on who will be using it a...

What to Ask a Wedding Photographer Before You Book

Booking a wedding photographer can feel deceptively simple: you like the photos, you like the vibe...

Why Stress Relief For Dogs Is Essential For Emotional Balance And Long-Term Wellbeing

Managing emotional health is just as important as physical care when it comes to pets, which is why ...

Australia’s Best Walking Trails and the Shoes You Need to Tackle Them

Australia is not short on spectacular walks. You can follow ocean cliffs in Victoria, cross ancien...

Why Pre-Purchase Building Inspections Are Essential Before Buying a Home in Australia

source Have you ever walked through an open home and started picturing your furniture, family d...