Daily Bulletin


  • Written by Dougal McCulloch, Professor, RMIT University

In nature, diamonds form deep in the Earth over billions of years. This process requires environments with exceptionally high pressure and temperatures exceeding 1,000℃.

Our international team has created two different types of diamond at room temperature — and in a matter of minutes. It’s the first time diamonds have successfully been produced in a lab without added heat.

Our findings are published in the journal Small.

There’s more than one form of diamond

Carbon atoms can bond together in a number of ways to form different materials including soft black graphite and hard transparent diamond.

There are many well-known forms of carbon with graphite-like bonding, including graphene, the thinnest material ever measured. But did you know there’s also more than one type of carbon-based material with diamond-like bonding?

In a normal diamond, atoms are arranged in a cubic crystalline structure. However, it’s also possible to arrange these carbon atoms so they have a hexagonal crystal structure.

This different form of diamond is called Lonsdaleite, named after Irish crystallographer and Fellow of the Royal Society Kathleen Lonsdale, who studied the structure of carbon using X-rays.

We created diamonds in mere minutes, without heat — by mimicking the force of an asteroid collision The crystal structures of cubic diamond and hexagonal Lonsdaleite have atoms arranged differently.

There is much interest in Lonsdaleite, since it’s predicted to be 58% harder than regular diamond — which is already considered the hardest naturally-occurring material on Earth.

It was first discovered in nature, at the site of the Canyon Diablo meteorite crater in Arizona. Tiny amounts of the substance have since been synthesised in labs by heating and compressing graphite, using either a high-pressure press or explosives.

Our research shows both Lonsdaleite and regular diamond can be formed at room temperature in a lab setting, by just applying high pressures.

Read more: Graphite: to capitalise Australia needs to invest in conversion

The many ways to make a diamond

Diamonds have been synthesised in laboratories since as far back as 1954. Then, Tracy Hall at General Electric created them using a process that mimicked the natural conditions within the Earth’s crust, adding metallic catalysts to speed up the growth process.

The result was high-pressure, high-temperature diamonds similar to those found in nature, but often smaller and less perfect. These are still manufactured today, mainly for industrial applications.

The other major method of diamond manufacture is via a chemical-gas process which uses a small diamond as a “seed” to grow larger diamonds. Temperatures of about 800℃ are required. While growth is quite slow, these diamonds can be grown large and relatively defect-free.

Nature has provided hints of other ways to form diamond, including during the violent impact of meteorites on Earth, as well as in processes such as high-speed asteroid collisions in our solar system - creating what we call “extraterrestrial diamonds”.

Scientists have been trying to understand exactly how impact or extraterrestrial diamonds form. There is some evidence that, in addition to high temperatures and pressures, sliding forces (also known as “shear” forces) could play an important role in triggering their formation.

Diagram explaining shear forces. In ‘shear’ forces, the object is pushed in one direction at one end, and the opposite direction at the other. Wiki Commons

An object being impacted by shear forces is pushed in one direction at the top and the opposite direction at the bottom.

An example would be pushing a deck of cards to the left at the top and to the right at the bottom. This would force the deck to slide and the cards to spread out. Hence, shear forces are also called “sliding” forces.

Making diamonds at room temperature

For our work, we designed an experiment in which a small chip of graphite-like carbon was subjected to both extreme shear forces and high pressures, to encourage the formation of diamond.

Unlike most previous work on this front, no additional heating was applied to the carbon sample during compression. Using advanced electron microscopy — a technique used to capture very high-resolution images — the resulting sample was found to contain both regular diamond and Lonsdaleite.

In this never before seen arrangement, a thin “river” of diamond (about 200 times smaller than a human hair) was surrounded by a “sea” of Lonsdaleite.

We created diamonds in mere minutes, without heat — by mimicking the force of an asteroid collision This electron microscope image shows a ‘river’ of diamond in a ‘sea’ of Lonsdaleite.

The structure’s arrangement is reminiscent of “shear banding” observed in other materials, wherein a narrow area experiences intense, localised strain. This suggest shear forces were key to the formation of these diamonds at room temperature.

Tough nuts to crack

The ability to make diamonds at room temperature, in a matter of minutes, opens up numerous manufacturing possibilities.

Specifically, making the “harder than diamond” Lonsdaleite this way is exciting news for industries where extremely hard materials are needed. For example, diamond is used to coat drill bits and blades to extend these tools’ service life.

The next challenge for us is to lower the pressure required to form the diamonds.

In our research, the lowest pressure at room temperature where diamonds were observed to have formed was 80 gigapascals. This is the equivalent of 640 African elephants on the tip of one ballet shoe!

If both diamond and Lonsdaleite could be made at lower pressures, we could make more of it, quicker and cheaper.

Read more: Our ability to manufacture minerals could transform the gem market, medical industries and even help suck carbon from the air

Authors: Dougal McCulloch, Professor, RMIT University

Read more https://theconversation.com/we-created-diamonds-in-mere-minutes-without-heat-by-mimicking-the-force-of-an-asteroid-collision-150369

Writers Wanted

How To Find The Right Emergency Plumber Lismore


Delivery rider deaths highlight need to make streets safer for everyone


The Conversation


Prime Minister Interview with Ben Fordham, 2GB

BEN FORDHAM: Scott Morrison, good morning to you.    PRIME MINISTER: Good morning, Ben. How are you?    FORDHAM: Good. How many days have you got to go?   PRIME MINISTER: I've got another we...

Scott Morrison - avatar Scott Morrison

Prime Minister Interview with Kieran Gilbert, Sky News

KIERAN GILBERT: Kieran Gilbert here with you and the Prime Minister joins me. Prime Minister, thanks so much for your time.  PRIME MINISTER: G'day Kieran.  GILBERT: An assumption a vaccine is ...

Daily Bulletin - avatar Daily Bulletin

Did BLM Really Change the US Police Work?

The Black Lives Matter (BLM) movement has proven that the power of the state rests in the hands of the people it governs. Following the death of 46-year-old black American George Floyd in a case of ...

a Guest Writer - avatar a Guest Writer

Business News

Nisbets’ Collab with The Lobby is Showing the Sexy Side of Hospitality Supply

Hospitality supply services might not immediately make you think ‘sexy’. But when a barkeep in a moodily lit bar holds up the perfectly formed juniper gin balloon or catches the light in the edg...

The Atticism - avatar The Atticism

Buy Instagram Followers And Likes Now

Do you like to buy followers on Instagram? Just give a simple Google search on the internet, and there will be an abounding of seeking outcomes full of businesses offering such services. But, th...

News Co - avatar News Co

Cybersecurity data means nothing to business leaders without context

Top business leaders are starting to realise the widespread impact a cyberattack can have on a business. Unfortunately, according to a study by Forrester Consulting commissioned by Tenable, some...

Scott McKinnel, ANZ Country Manager, Tenable - avatar Scott McKinnel, ANZ Country Manager, Tenable

News Co Media Group

Content & Technology Connecting Global Audiences

More Information - Less Opinion